汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场

PRODUCT DESCRIPTION LOCTITE ECI 7001 E&C provides the following product characteristics: Technology Thermoplastic Appearance Black Product Benefits ● Good conductivity ● Good screen residence time ● Non-critical, flexible low temperature drying cycles ● Compatible for use with polyimide and polyester film ● Applicable with manual, semi-automatic or high speed reel-toreel screen printing equipment Cure Heat cure Application Conductive Ink Typical Assembly Applications Current collectors in printed batteries LOCTITE ECI 7001 E&C conductive, screen printable ink consists of very finely divided graphite particles dispersed in a thermoplastic resin. It is specifically designed for use in the production of printable batteries applied on flexible substrates. TYPICAL PROPERTIES OF UNCURED MATERIAL Solids Content (+/- 5%), % 38.5 Density, g/cc 1.14 Viscosity, Brookfield , 25 °C, mPa·s (cP): Speed 20 rpm 20,000 Shelf Life @ 5°C (from date of manufacture), year 1 Flash Point - See MSDS TYPICAL SCREEN PRINTING PROCESS Printing Equipment Type Manual Semi-automatic High speed reel-to-reel Applied Dry Coating Thickness Applied Dry Coating Thickness, μm 30 to 35 Emulsion Thickness Emulsion Thickness , μm 20 to 40 Recommended Screen Type Monofilament polyester, threads/cm 12 to 21 Recommended Squeegee Polyurethane , durometer 60 to 75 TYPICAL CURING PERFORMANCE Recommended Drying Cycle 10 minutes @ 120°C LOCTITE ECI 7001 E&C can be dried immediately after printing at 10 minutes @ 120°C. Alternative cycles are also possible. The above drying profile is a guideline recommendation. Conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer drying equipment, oven loading and actual oven temperatures. TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties Coverage @ 10 μm thickness, m2/kg 22 Electrical Properties Sheet Resistivity @ 25 μm polyester film, ohms/sq <10 TYPICAL PERFORMANCE OF CURED MATERIAL Miscellaneous Adhesion Strength, ASTM-3559B: On polyester film, >4B GENERAL INFORMATION For safe handling information on this product, consult the Material Safety Data Sheet, (MSDS). DIRECTIONS FOR USE 1. LOCTITE ECI 7001 E&C is supplied ready for use and does not require dilution. 2. Stir LOCTITE ECI 7001 E&C prior to each use. 3. Avoid rapid stirring as this causes air entrapment. 4. Should thinning become necessary, dilute 1 to 3% by weight with Butylglycolacetate. Not for product specifications The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. Clean-up 1. The equipment can be cleaned with MEK, MIBK, Acetone or similar solvents.