汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场

PRODUCT DESCRIPTION LOCTITE ECI 9002 E&C provides the following product characteristics: Technology Thermoplastic Appearance Black liquid Filler Type Carbon Black Product Benefits ● Small particle size ● Excellent adhesion Cure Hot air drying Application Printed electronics, Conductive and dielectric inks Key Substrates PET substrates LOCTITE ECI 9002 E&C screen printable carbon ink is formulated with very fine particle size distribution for use in metal mesh applications. TYPICAL PROPERTIES OF UNCURED MATERIAL Brookfield Viscosity CP51, mPa·s (cP): Speed 30 rpm 3,300 Thixotropic Index (3/30 rpm) 2.3 Density, g/ml 1.1 Solids Content, 1hour @ 150oC, % 42 Particle Size, Hegmann, μm <20 Shelf Life @ 20°C, days 180 Flash Point - See SDS TYPICAL CURING PERFORMANCE Recommended Drying Cycle 30 minutes @ 130°C The above drying profile is a guideline recommendation. Conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer drying equipment. TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties Adhesion, ASTM D3359B 5B GENERAL INFORMATION For safe handling information on this product, consult the Safety Data Sheet, (SDS). Not for product specifications The technical data contained herein are intended as reference only. Please contact your local quality department for assistance and recommendations on specifications for this product. DIRECTIONS FOR USE Surface Preparation 1. Thoroughly clean the surface prior to application of ink. Mixing/Dilution 1. Mix thoroughly before use to ensure ink is homogenous. Application 1. Recommended screen printing parameters are: Screen Type Polyester Screen mesh 200 to 300 Cleanup 1. The equipment can be cleaned with esters (butylacetate, ethylacetate) or ketones (MIBK, MEK) or alcohol. STORAGE: Store product in the unopened container in a dry location. Storage information may be indicated on the product container labeling. Optimal Storage : 20 °C Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technic