汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场

PRODUCT DESCRIPTION LOCTITE EDAG 24639 SS E&C provides the following product characteristics: Technology Thermoplastic Appearance Silver Product Benefits ● Easily applied by flexigraphic or rotogravure print techniques Cure Air dry Application Conductive coating Typical Assembly Applications ● Body contact pads ● Medical sensors ● ECG/EKG disposable electrodes ● TENS pads LOCTITE EDAG 24639 SS E&C medical EKG coating is designed to provide controlled electrical properties on flexible substrates. This adhesive is compatible with EDAG E&C silver and carbon inks. TYPICAL PROPERTIES OF UNCURED MATERIAL Solids Content by Weight, % 62 Viscosity, Brookfield -5 minutes paint shake, - RVT3, 25 °C, mPa·s (cP): Speed 20 rpm 600 Density, kg/l 1.92 VOC, g/l 720 Shelf Life @8 to 28°C, days (from date of qualification in original seal) 365 Flash Point , oC 14 TYPICAL DRYING CYCLE Recommended Drying Cycle Recommended Application Thickness: 0.3 mil dried: 15 minutes @ 94°C 5 minutes @ 121°C The curing time of LOCTITE EDAG 24639 SS E&C will vary depending upon the thickness of the film layer and the application. Other factors decreasing curing time are air flow, infrared and bottom heating. Force dry coated film with high velocity hot air or infrared systems. High temperatures for long duration improve performance. Design drying rates for the maximum the substrate and production speeds can tolerate. The above drying profile is a guideline recommendation. Conditions (time and temperature) may vary based on customers' experience and their application requirements, as well as customer drying equipment, oven loading and actual oven temperatures. TYPICAL PROPERTIES OF CURED MATERIAL Physical Properties Theoretical Coverage @ 25μm: sq ft/gal 301 m2/l 7.4 m2/kg 3.89 Electrical Properties Sheet Resistance, ohms/sq/mil <0.15 GENERAL INFORMATION For safe handling information on this product, consult the Safety Data Sheet, (SDS). DIRECTIONS FOR USE 1. This product is supplied ready for use. 2. Should thinning become necessary, dilute 5% by weight with n-Propylacetate. 3. Recommended thickness: 0.05 to 0.3 mil dried. Mixing/Dilution 1. LOCTITE EDAG 24639 SS E&C can be gently stirred or placed on a paint shaker prior to use. 2. Avoid rapid stirring, as this causes air entrapment. 3. Avoid contact with any metallic materials. 4. Use plastic spatulas, plastic containers. CLEAN-UP ● To clean screen and equipment, use MEK, MIBK, Acetone or similar solvents.