汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场汉高电子材料市场

●订货&技术咨询 :135 2451 4271 同微信

●提供TDS技术资料、MSDS安全技术资料、COA质保书;

●提供金属表面处理新产线方案和在线自动监测和加药系统方案;

●可开增值税专票;

●实力长期稳定供货;

 ● Gently stir prior to use.

 ● Avoid rapid stirring, as this causes air entrapment.. 2. Application 

● Many factors influence the film thickness and shape of the deposit. These includes snap-off distance, syencil thickness, squeegee material, or dot dispensing equipment of choice. Stencil printing is recommended for optimum deposit control and registration. 

● Stencil printing is recommended for optimum deposit control and registration Recommended Thickness, mils 5 to 10 Stencil Type brass or stainless steel Stencil Thickness, mils 8 to 10 Squeegee Type metal, paste retainer . 3. Pick and Place 

● Place device atop the wet print. 

● Take care to apply just enough pressure to allow the ink to wick onto the leads, but not to displace the ink as to cause bleeding onto adjacent conductive tracks. Pick-and-place equipment can be adjusted to optimize this feature. 4. Thinning and Cleanup ● Uncured resin may be cleaned with Isopropanol, MEK and similar solvents. Storage Store product in the unopened container in a cool dry well ventilated area. Storage information may be indicated on the product container labeling. Optimal Storage: -20°C. Storage below -20°C or greater than -20 °C can adversely affect product properties. Material removed from containers may be contaminated during use. Do not return product to the original container. Henkel Corporation cannot assume responsibility for product which has been contaminated or stored under conditions other than those previously indicated. If additional information is required, please contact your local Technical Service Center or Customer Service Representative.